Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate. Given the 120 V (±5%) mains supply used in the United States [14] and Canada, [15] these higher ratings permit devices with C6 and C8 inputs to draw more than 114V × 2. Typical applications with increased pin temperatures include appliances with heating coils such as ovens or electric grills. Everything looks cool - I'll spend the day tomorrow re-arranging the studio and installing the new leads.

Power Cord - UK Plug to C5 Clover Leaf CloverLeaf Lead 1.8m Cable

These are similar in form to the C13/C14 coupler, except with a ridge opposite the earth in the C16 inlet (preventing a C13 fitting), and a corresponding valley in the C15 connector (which doesn't prevent it fitting a C14 inlet). The appliance inlet is designated by the even number one greater than the number assigned to the connector, so a C1 connector mates with a C2 inlet, and a C15A mates with a C16A.Connectors" and "appliance outlets" are fitted with socket contacts, and "appliance inlets" and "plug connectors" are fitted with pin contacts. Thank you once again for the very good service I have received from you today - I wonder if it's too much to hope that I will encounter such good service for the rest of the day - Ah well I can dream!

IEC 60320 - Wikipedia IEC 60320 - Wikipedia

I've worked with many people in and around the music biz, if more folk were like you it would be a far better industry !These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F). Note that the manufacturer's page only mentions the 10A rating when used with 18 AWG wire; the UL certification allows 13A when used with 16 AWG wire. Appliances can be used in another country easily, with a simple change of the power supply cord (including a connector and a country-specific plug). To have done this at no additional cost is all the more remarkable and I wanted to express my appreciation.

UK Cloverleaf Power Cables - C5 Mains Leads | TVCables

The standard uses the terms "male" and "female" only for individual pins and socket contacts, but in general usage they are also applied to the complete plugs and connectors.IEC 60309 specifies larger couplers used for higher currents, higher voltages, and polyphase systems.

IEC to Cloverleaf Power Cables - C14 to C5 Mains Leads | TVCables IEC to Cloverleaf Power Cables - C14 to C5 Mains Leads | TVCables

Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it". Not that your workmanship was ever in doubt but specifying electrical connections, especially oddball ones like this one which cannot be bought off the shelf, is new to me. a Protection Class II connector cannot mate with a Class I inlet which requires an earth); whereas connecting a Class I connector to a Class II appliance inlet is possible because it creates no safety hazard. The C6 inlet is used on laptop power supplies and portable projectors, as well as on some desktop computers, some LCD monitors and recent LCD televisions from LG. The standard uses the term coupler to encompass connectors on power cords and power inlets and outlets built into appliances.A high-temperature-rated cord with a C15 connector can be used to power a computer with a C14 plug, but a cord with a low-temperature C13 connector will not fit a high-temperature appliance that has a C16 plug. IEC 60320 Appliance couplers for household and similar general purposes [1] is a set of standards from the International Electrotechnical Commission (IEC) specifying non-locking connectors for connecting power supply cords to electrical appliances of voltage not exceeding 250V (a. There is some public confusion between C13/C14 and C15/C16 couplers, and it is not uncommon for C13/C14 to be informally referred to as "kettle plug" or "kettle lead" (or some local equivalent). This lead is more commonly known as either a “Mickey Mouse” lead or “Cloverleaf” due to it’s distinctive shape.