The micro switch in the Comet sink mixer tap failed. The van is a 2006 Swift Abbey and is the same tap to this poster http://www. caravantalk. co. uk/community/topic/108382-leaking-kitchen-tap-swift/ http://assets. swiftgroup. co. uk/uploads/HandBooks/caravans/Previous%20Tourer%20Handbooks/1051572000%20Caravan%20Owners%20Hbook%202004. pdf What surprised me were the number of different fitting arrangements on these taps. Discussing with the guy at our local outlet there are three diff sizes of across two mounting styles with lots of different 'tail' configurations, "they are all standard, just happens there are several standards"...... Air Compressor Filters Accessories & Consumables Air Tools and Accessories Oils & Lubricants Low Noise Compressors

Electric Pressure Washers Petrol & Diesel Driven Pressure Washers Hot Pressure Washers Pressure Washer Accessories Detergents, Chemicals and Algicides Pressure Washer Spares Hoses & Accessories According to the Swift Handbook the Micro switch in a Comet Tap is removed/replaced from the Top of the tap. Electric Heater Accessories Gas Cylinder Storage Gas Heater Accessories Propane/Butane Hoses and Regulators

My tap does indeed have a feint etching of Comet on it. It also has a single stud fixing as opposed to a single large plastic nut onto a plastic body. I removed the tap from the worktop (single bolt) as there was enough give in the flexible hose tails which are about a metre long. The failure of the old microswitch was a broken wire, I guess the constant rotating of the tap between hot and cold takes its toll on the wires. Submersible Pumps - Fountain & Pond Miscellaneous and Transfer Pumps Pump Accessories Pump Controllers & Switches Hose Hose Clips Couplers, Valves & Filters Washdown Pump Kits I couldn't get the microswitch wires to pull through the tap and I learn that one has to dismantle the whole tap. The water pipe connections are behind the cooker and whilst one San feel them, the cooker needs to come out to get to them, I had the cooker out a few months ago to replace a thermo coupler, didn't particularly want to take it out again.