Thanks to its unique butterfly-shaped wing ducted cooling fan, the new Ender also draws in 169% more air than previous models, providing the cooling needed to ensure print quality, while its customized nozzle can hold up to 50mm³ inside its melt for smooth feeding, even at high printing speeds.

You can buy the Ender 7 if you want a high-speed, well-equipped CoreXY 3D printer and don't mind a few minor design flaws on the Z axis and the fact that the print volume is small. And it is important to note that using high speed printing without reaching sufficient temperature may result in fragile products printed from the infill (several customers have reported this problem). With the Creality Ender 7, you can enjoy the fastest 3D printing with up to 250 mm / s with high print quality. SOFTWARE Recommended slicer: Cura, Simplify3D, Repetier-Host,Creality Operating system: Windows, Mac OSX, Linux File types: STL, OBJ, AMF Unboxing and Assemble The Ender-7 has a heated, silicon-carbide print bed, which is mounted cantilevered on the single lead-screw Z-axis. Four spring-loaded screws attach the bed to the z-axis, and allow for manual bed leveling. The full metal extruder with double drive gear ensures a strong grip, greater and more even extrusion force and a continuous and stable feed.

This firmware only works if you have the TH3D Ender 7 LCD Conversion kit installed. Get the conversion kit here: TH3D Ender 7 LCD Conversion Kit Board Compatibility # Bed leveling: This is necessary to make sure the Creality Ender 7 3D Printer’s print head is the exact same distance from the bed anywhere in the X/Y coordinates of its print travel. To do this, you’ll move the print head to each corner of the print bed via the touch screen controls and then use the corresponding manual dial underneath to adjust the height of the print bed from the print head to where it just touches the sheet of paper. The paper acts as a feeler gauge, and after adjusting each corner, you move to the next until you have done all four at least 4 times because each corner affects the other 3 (hopefully with decreasing amounts each time). I found it worked best when I could just feel the nozzle scratching a little like a rollerball pen feels, but it’s subjective and the resulting print may result in you adjusting feel. For the price I would have expected auto-bed leveling considering that it’s included on some of Creality’s lower priced Ender models.

A: The Ender 7 does not come with an automatic bed leveling function. The printhead can be sent to five different points on the bed, though, and you will have to adjust the bed via the knobs yourself.

Conclusion

MATERIALS Filament diameter: 1.75 mm Third-party filament: Yes Filament materials: Consumer materials (PLA, ABS, PETG, Flexibles) config => The klipper config file in the klipper directory (this has the presets required for ender7 from make menuconfig) First time using our firmware or having issues? Watch our video that is intended to clear up common mistakes people make when opening and using the firmware here: Unified 2 VSCode Tips for Noobs | EZTip #8 – YouTube To avoid too much interference from the outside world, this test uses offline printing to record actual print speeds. Ender-7 actually print this vase model in only 23 hours, which is 7 hours faster than the estimated time, and the Ender -3 V2 printer actually took 40 hours to print the vase. Once the files are extracted you will need to open the folder in Visual Studio Code. You must open the folder named Firmware and not any other one. Failure to open the firmware at the correct folder level will result in it not working.