FLSUN QQ-S pro is equipped with filament detection, and turns-off automatically after the completion of 3D printing a part or functional prototypes. These qualities make it a perfect 3D printer for use at offices and at homes. The standard test of any good 3D printer, we printed a 3DBenchy with zero supports. The result was an almost perfect Benchy — barely any imperfections even in the overhangs to create the inside part. Very impressive from the FLSUN QQ-S 3D printer. Like all other typical Delta 3D printers, this one too has a fixed, nonmoving, printing bed that needs to be leveled only once which makes it pretty feasible if you are going to 3D print for the first time.

There is a huge demand of high-tech glass bed because it releases prints in the coolest manner one can ever imagine to take off the part or functional prototype from the print bed.

Security

The printer is pretty much plug-and-play. There is an instruction manual that you must go through before starting with your first 3D print. The SR already comes with silent stepper drivers (TMC2209), so you can just skip this section. # BOM (What you'll need) You can set it up to run multiple boards on a single printer (if you have a ton of steppers and/or extruders) The QQ design also offers a larger print area than most, specified as 255mm x 255mm (for most designs you can use the full 265mm of the bed). The Flsun QQ-S Pro is not perfect, but it invites upgrades and improvements thanks to a good base. The 3D printer can also achieve acceptable results ex-factory.

The print speed of FLSUN QQ-S pro is 300 millimeters per second, you can print with filaments of 3D printing materials such as ABS, PLA, HIPS, Flex, Wood, etc., provided they have a filament diameter of 1.75mm. The nozzle diameter of this 3D printer is 0.4 mm. Now we had tested a larger, more uniform 3D printed part, we moved to more intricate pieces. To test this, we used models found on Thingiverse of a Bulbasaur pokemon, and to try a very thin and intricate model, the Peacekeeper 3D printed gun from the popular game Apex Legends. When everyone got the gift box, everyone's face was filled with happy smiles. Some people can't wait to open the gift box, eat an apple, and share the content of their note with everyone. Of course, there are still many people who choose to show their peace fruit in their circle of friends. Im doing further tests for geometry and finish but so far 60hz is going to ok to start with. In the coming weeks i will do additional tests and post a graph of the results based on Frequency change v Quality and Accuracy.

You may also like…

Very sturdy, due to the anchoring from the lower and side panels that keep the delta 3D printer stable, and printing accurate. or in software (in the config.txt file, look for lines that say INVERT_X_DIR or EXT0_INVERSE and change the values, then reflash this file). Has auto leveling and since it has no moving print bed, only needs to be leveled once. This is a major plus for beginners without as much technical skills.

Next, we tried a larger Pokemon model, of a Venonat. This took around 2 hours, and came out looking crisp and well defined, even in the antennae and top spikes which are printed vertically with no supports. There were small amounts of stringing but this is to be expected in this situation. We printed it with supports, but turned on its side the model could probably have been smoother. Again, this does not reflect on the FLSUN QQ-S, but on our haste. Yes, assuming you are using Marlin firmware and not using the wifi module. See https://www.youtube.com/watch?v=7ShcFKXrVHo (opens new window) for the Q5. QQ-S is similar.

Instructions for the custom firmwares are provided by the repositories, respectively. # Marlin # Build your own The first layer of 3D printer filament is laid down on the print bed according to the geometry of the part or functional prototype that’s fed to the printer. Move the carriage to the top position, where you can barely access the screws and tighten the rail clamping screws. Large Printing Size Φ255*360mm: Support various 1.75mm diameter printing filaments like PLA,etc. Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.