About this deal
Two sizes available: Standard (10mm diameter cable, 72A max) or Large (17mm diameter cable, 200A max).
This device adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers. The best way to calibrate it is to attach the clamp around a cable with a known current running through it. Often this product is bought with it, they are naturally assuming that you have got all the products of their manufacture already saw you come past yours with products that you already own. state” on line 59 with the number 240 and then delete the home assistant sensor section (lines 42 – 47).Once you reach the point in monitoring your home’s energy usage with Home Assistant, you can consider yourself an advanced user. Flow temp is 55C with weather modulation - it's expensive but works even during the Beast from the East.
My only issue so far is that it is reporting way too much and suspect it has been the cause of my Home Assistant instance running more sluggish than usual.I have an air source heat pump (ASHP) and big electricity bills, so I would like to track the consumption of the ASHP. If a few bytes get missed, or the receiver gets out of step and decodes the data wrongly (which is possible if there’s a long string of zeros), that could cause no end of problems with false data being recorded. The only issue with this model is that the supplied CT (current transformer) is not large enough to go round the 25mm tails which nowadays are used from your supply meter to your consumer unit in the house.